四阶微分方程奇异边值问题的正解

本文利用锥上的不动点指数理论,在更一般的边界条件下讨论了一类四阶奇异边值问题正解的存在性并给出了应用．     

负折射指数物质中金属线对电磁波的影响

构造两种结构负折射指数物质(NRM)，利用数值模拟计算两种结构的S参数.由于这种结构尺度比波长小，为精确利用有限积分技术(FIT)进行模拟.通过对这两种结构中金属线位置变化对金属谐振频率影响进行模拟，最后得出由于金属线与谐振环耦合，金属线对称破缺影响谐振环谐振频率和通带，并对等效负折射指数为负的频带产生影响. 关键词： 负折射率 左手物质 通带 金属线对称破缺     

SPR棱镜传感器测量液体折射率的原理

推导了消失波函数的表达式,介绍了衰减全反射现象及SPR传感器测量液体折射率的原理,并利用SPR传感器测量了牛奶样品的反射系数及折射率与脂肪等主要成分含量的关系曲线.     

短波通滤光片膜系设计

详细介绍用等效折射率概念设计短波通滤光片的原理和计算方法。根据原理和方法，选择二氧化钛（TiO2）作为高折射率材料、二氧化硅（SiO2）作为低折射率材料。首先从理论上计算出用这2种材料设计的波长λ=950～1150nm的短波通滤光片所需要的周期数，然后给出短波通滤光片的主膜系和光谱曲线。由于据此周期数设计出的膜系光谱曲线在750～810nm处的透过率不符合要求，因此对该膜系进行了改进。依照改进的设计进行多次制备，最终制备出了符合要求的短波通滤光片，找到了最佳制备工艺和方法。最后，对制备出来的短波通滤光片薄膜进行了各种环境实验。实验结果表明，膜层的各项指标符合设计要求。     

Converged properties of clean metal surfaces by all-electron first-principles calculations

All-electron full-potential linearized augmented plane-wave calculations of the surface energy, work function, and interlayer spacings of close-packed metal surfaces are presented, in particular, for the free-electron-like metal surfaces, Mg(0 0 0 1) and Al(1 1 1), and for the transition metal surfaces, Ti(0 0 0 1), Cu(1 1 1), Pd(1 1 1), and Pt(1 1 1). We investigate the convergence of the surface energy as a function of the number of layers in the slab, using the Cu(1 1 1) surface as an example. The results show that the surface energy, as obtained using total energies of the slab and bulk from separate calculations, converges well with respect to the number of layers in the slab. Obviously, it is necessary that bulk and surface calculations are performed with the same high accuracy. Furthermore, we discuss the performance of the local-density and generalized gradient approximations for the exchange-correlation functional in describing the various surface properties.     

Density functional theory investigation of the structure of SO2 and SO3 on Cu(1 1 1) and Ni(1 1 1)

Density functional theory (DFT) slab calculations, mainly using the generalised gradient approximation, have been used to investigate the minimum energy structures of molecular SO₂ and SO₃ on Cu(1 1 1) and Ni(1 1 1) surfaces. On Ni(1 1 1) the optimal local adsorption structures are in close agreement with experimental results for both molecular species obtained using the X-ray standing wavefield technique, although for adsorbed SO₂ the energetic difference between two alternative lateral positions of the lying-down molecule on the surface is marginally significant. On Cu(1 1 1) the results for adsorbed SO₂, in particular, were sensitive to the DFT functional used in the calculations, but in all cases failed to reproduce the experimentally-established preference for adsorption with the molecular plane perpendicular to the surface. This result is discussed in the context of previously published DFT results for these species adsorbed on Cu(1 0 0). The optimal geometry found for SO₃ on Cu(1 1 1) is similar to that on Ni(1 1 1), providing agreement with experiment regarding the molecular orientation but not the adsorption site.     

Existence and multiplicity of solutions for a nonlinear Neumann problem

We consider a Neumann problem of the type -εΔu+F ^′(u(x))=0 in an open bounded subset Ω of R ⁿ , where F is a real function which has exactly k maximum points. Using Morse theory we find that, for ε suitably small, there are at least 2k nontrivial solutions of the problem and we give some qualitative information about them. Received: October 30, 1999 Published online: December 19, 2001     

统计优化迭代法测量质子交换波导折射率分布

提出了一种用于拟合测量渐变波导的折射率分布的新的理论处理。该方法把统计优化手段导入循环迭代法 ,可适用于费米函数这一类曲线变化范围大、且有多个自变量的函数。实验上用焦磷酸质子交换制备了LiNbO3波导样品 ,用该方法对退火后的折射率分布作了测量拟合 ,折射率拟合值与实验值的均方差为± 8.2× 10 - 4。     

斜角入射沉积法制备渐变折射率薄膜的折射率分析

斜角入射沉积法是一种制备薄膜的新颖方法,它可以用来制备渐变折射率薄膜.本文首先探讨了膜料的沉积入射角为α,薄膜柱状生长倾斜角为β时的薄膜的填充系数;之后利用drude理论,分析研究了斜角入射沉积法制备渐变折射率薄膜的折射率与薄膜的入射角和生长方向的关系. 关键词： 斜角入射沉积 渐变折射率 填充系数     

宽带放大器用碲基掺铒光纤结构参量的设计考虑

利用光波导理论及均匀展宽四能级模型，研究了宽带放大器用阶跃型折射率分布碲基掺铒光纤的结构参量—纤芯半径和相对折射率差的设计考虑.理论研究表明，在单模传输条件下，为获取最大信号增益，宜选择相对折射率差大的碲基掺铒光纤来构建光纤放大器.相对折射率差一定的情况下，在高泵浦功率、小信号输入或光纤长度短于各信道最佳增益长度时，选择纤芯半径大的碲基掺铒光纤可以得到大的信号增益；反之，宜选择纤芯半径小的碲基掺铒光纤.